Elmhurst Masonry Contractor
Masonry in Elmhurst, Queens
Brick, block and stone repaired and rebuilt at Elmhurst homes and apartment buildings, from lintels to garden walls.
- Walls, lintels and parapets
- Chimneys and yard walls
- Free visit and written price
What Masonry Repairs Are Common in Elmhurst?
Common jobs include rebuilding loose brick, replacing rusted lintels, rebuilding parapets, repairing chimneys and fixing garden and side yard walls. The area has both older brick and newer apartment buildings, so materials and methods vary by block.
Apartment buildings along Broadway, Queens Boulevard and Grand Avenue often show cracked brick at window corners and crumbling parapet caps. Attached homes have chimneys, front walls and low fence walls that need attention.
Elmhurst also sits close to major medical and school buildings, so foot traffic passes below many masonry facades. Loose brick is a safety issue as well as a repair issue.
Owners often discover masonry trouble when a piece of brick or coping lands on the sidewalk. Do not wait for that. A cracked window corner or a leaning wall cap is a warning that costs less to fix now.
Why Do Lintels and Facades Crack?
Steel lintels over windows and doors rust, swell and push the brick above them up and out, leaving a stair step crack from the corner of the opening. Water is the driver, entering through failed mortar or a leaking roof edge.
Cracks at the corners of windows are the classic sign. If a crack widens, or the brick above the opening sags, have it checked soon.
A facade that bulges is more serious, and may need an engineer and scaffold. We say so at the visit.
Salt from winter sidewalk treatment splashes up on low brick and stoop walls and eats the surface and mortar. Fixing the drainage at the base of those walls helps the new work last.
How Do We Rebuild or Repair Masonry?
We find the cause of the damage first, remove loose or damaged units, replace rusted steel where needed and rebuild with matching brick or block. New work is tied into the old and finished with mortar that suits the wall.
The table lists the usual fix for each common problem in Elmhurst.
For a leaning garden or yard wall, the cause is usually the footing or soil pressure. We dig, rebuild the footing where needed, lay new courses and cap the top. Weep holes let water out from behind so pressure does not build again.
Where steel is replaced, it is treated and set so that moisture cannot sit against it. That step matters more than the brick that goes above it.
| Problem | What we do |
|---|---|
| Rusted lintel with cracked brick above | Remove brick, replace the lintel and rebuild |
| Crumbling parapet | Rebuild the parapet and cap it to shed water |
| Loose chimney courses | Take down the loose section and rebuild |
| Leaning garden wall | Rebuild the footing and wall, with drainage |
Brick Cracking Over an Elmhurst Window?
Send a photo of the crack. We will tell you if it needs a lintel or a repoint.
Do Elmhurst Masonry Jobs Need Permits or Inspections?
It depends on the work. Structural repairs, retaining walls and scaffold on the sidewalk can involve city permits. Facade inspections every five years under Local Law 11 apply to buildings above six stories, and the city can confirm whether yours is one.
If a filing professional has flagged your facade, we can carry out the listed repairs and provide photos and records.
We do not know of a historic district here that would add landmark review, but ask the city if you think your building is protected.
If you rent your unit, pass this information to the owner. Facade and lintel repairs are the owner's job to arrange and approve.
What Does Masonry Work Cost Depend On in Elmhurst?
Size of the repair, the material, how much has to come down, scaffold or lift needs, steel replacement and permits drive the price. We give a written price after a free look, listing each part of the work.
A rebuilt garden wall is a modest job next to a full parapet rebuild on a four story building. Matching old brick can add lead time.
If we open a wall and find more damage than we saw from outside, we stop and talk to you before we change the scope.
You will get a written scope for each wall or opening, so you can approve work in stages and keep track of what has been finished.
We can also give you a reasonable order of repairs if the budget is limited. Safety items come first, and cosmetic items last.
How Does a Masonry Job Run in Elmhurst?
Inspect
We look at the wall, the cracks and access.
Written scope
You see the work and price on paper.
Take down
Loose masonry is removed with care.
Rebuild
New brick or block is laid and tied in.
Finish
Joints are tooled and the wall is cleaned.
Nearby
Masonry Near Elmhurst
We handle masonry in the central Queens neighborhoods around Elmhurst.
FAQ
Elmhurst Masonry Questions
A lintel is the beam over a window or door. When steel rusts it expands and pushes on the brick, causing cracks at the corners.
Yes. We take down loose parts, rebuild with matching brick and add a cap that sheds water.
As closely as materials allow. We tell you before work if an exact match is not likely.
Buildings taller than six stories generally do. Confirm your status with the city.
Yes. Call (718) 468-8803 for a free visit.
Contact
Request Your Masonry Quote
Describe the wall and the problem. A photo from the street and one up close help most.
- Call us(718) 468-8803
- HoursMon to Sat, 9:00 AM to 6:00 PM
- Free on site estimate with a written price
- Licensed and insured, 25+ years in business
- We handle DOT sidewalk permits
- Serving Manhattan, Brooklyn, Queens and the Bronx
Get Your Free Estimate
Takes about a minute. No cost and no obligation.