Flushing Masonry
Masonry in Flushing, Queens
Brick, block and stone repaired and rebuilt at Flushing homes and apartment buildings, from garden walls to parapets.
- Walls, lintels and parapets
- Chimneys and yard walls
- Free visit with a written price
What Masonry Jobs Come Up in Flushing?
The common jobs are rebuilding loose brick, replacing rusted lintels, repairing parapets and chimneys and fixing yard and garden walls. Flushing combines older brick buildings and newer towers, so the methods and materials vary from block to block.
Apartment buildings and co ops along Main Street, Northern Boulevard and Kissena Boulevard show cracking at window corners and crumbling parapet caps. Detached homes bring chimneys, front walls and low walls along the lot line.
Many of those walls have stood for decades, and the repairs we do extend that life.
Owners often find out about masonry trouble when a piece of brick lands on the sidewalk. A cracked window corner or a leaning cap is the warning that costs far less to fix early.
- Cracks at window corners
- Rusted lintels lifting brick
- Crumbling parapet caps
- Leaning garden walls
- Loose chimney bricks
- Spalling brick faces
Brick Cracking at Your Flushing Property?
Send photos of the crack and the wall around it. We will tell you where to start.
Why Do Brick Walls and Lintels Crack?
Water is the driver. It enters through failed mortar or a roof edge, rusts steel lintels and rebar, and the rust expands and cracks the brick around it. A stair step crack rising from a window corner is the classic sign.
Freeze and thaw do the rest, forcing water in the cracks apart each winter. Ground movement can also shift footings and crack garden walls.
A wall that bulges or a parapet that leans is more serious and may need an engineer and scaffold.
Salt used on winter sidewalks splashes onto low brick and stoop walls and eats at mortar. Better drainage at the base helps new work last.
How Do We Repair or Rebuild Masonry?
We find the cause first, then take out loose or damaged units, replace rusted steel, repair footings where needed and rebuild with matching brick or block. New work is tied into the old and finished with suitable mortar and a cap that sheds water.
Small repairs take days. Larger rebuilds take longer and may need permits and scaffold.
We match the existing materials as closely as we can. Very old brick and block may not come in matching sizes, and we tell you beforehand.
When we open a wall and find more damage than expected, we stop and talk to you before changing the scope.
Reinforcing steel and lintels that we replace are set so that moisture cannot sit against them. That detail matters more than the brick above it.
Do Flushing Masonry Jobs Need Permits or Inspections?
Some do. Structural work, retaining walls and scaffold on the public sidewalk can need city permits, and buildings over six stories fall under Local Law 11 facade inspections every five years. Your address may carry its own rules, so ask the city.
Flushing has historic sites such as the Quaker Meeting House, Bowne House and Town Hall, but we cannot confirm a historic district that covers ordinary homes. If you think your building is landmarked, tell us and check with the city.
We carry out repairs listed in a facade report and document the work.
Landmark questions come up for some Flushing sites. Ask the city whether your building has any special status before you plan work on the facade.
We can also meet a filing engineer on site and work from their list.
What Does Masonry Cost Depend On in Flushing?
Size of the repair, material, how much has to come down, scaffold or lift needs, steel replacement and permits. We write a price after a free visit, listing each wall or opening.
A rebuilt yard wall is a modest job next to a parapet rebuild on a tall building. Matching old brick may add lead time.
You get a written scope so you can compare it line by line.
We can order repairs by priority if the budget is limited. Anything that could fall or fail under load comes first.
How Do You Keep Garden and Retaining Walls From Leaning?
Give the water somewhere to go. Weep holes, free draining backfill and a sound footing relieve the pressure that pushes walls out. A wall holding soil near a driveway or walkway should also be sized for the load.
Retaining walls can involve permits and engineering, so ask the city early. We can rebuild walls that have leaned and fix the drainage behind them.
Plant roots and downspouts dumping against a wall cause many cracks. We look for both during the visit.
Why Flushing Owners Call Us for Masonry
We fix the cause
Drainage, footing and steel get attention first.
25+ years of masonry and concrete
Experience with how NYC materials fail.
Licensed and insured
Construction, injury and workers compensation insurance.
Nearby
Masonry Near Flushing
We handle masonry in the neighborhoods around Flushing.
FAQ
Flushing Masonry Questions
A lintel is the beam above a window or door. When it rusts it expands and cracks the brick above it.
Yes. We take down loose sections, rebuild them and add a cap that sheds water.
As closely as materials allow. We tell you before work if an exact match is unlikely.
Buildings over six stories generally do. Check your status with the city.
Yes. Call (718) 468-8803 for a free visit.
Free on site estimate
Rebuild Your Flushing Masonry
Free visit, written price and careful repairs.
Contact
Request Your Masonry Quote
Describe the wall and the problem. Photos from the street and up close help.
- Call us(718) 468-8803
- HoursMon to Sat, 9:00 AM to 6:00 PM
- Free on site estimate with a written price
- Licensed and insured, 25+ years in business
- We handle DOT sidewalk permits
- Serving Manhattan, Brooklyn, Queens and the Bronx
Get Your Free Estimate
Takes about a minute. No cost and no obligation.