Parkchester Brick Pointing
Brick Pointing in Parkchester, the Bronx
Failing mortar joints on the large brick buildings of Parkchester and the houses around them, cut out and repointed to keep water out of the wall.
- Mortar matched to the existing brick
- Large facades planned in sections
- Free inspection and written quote
Local Conditions
Why Does Brick Need Pointing in Parkchester?
Parkchester is a large planned community of mid rise brick buildings from the late 1930s and 1940s. Mortar on walls that old has faced many decades of rain, frost and sun. Joints crumble, water enters, and the brick behind them starts to suffer.
Built by Metropolitan Life, the complex has long, repeated facades. A single failing joint pattern can repeat across several buildings, so a plan that covers a whole facade makes more sense than patching spots.
The buildings carry terra cotta figures and brick detail. Pointing near these features calls for care, since the wrong mortar can stain or damage them.
Private houses and small apartment buildings on nearby streets like Metropolitan Avenue and Castle Hill Avenue also have brick fronts, chimneys and stoops that need the same attention.
How Is Repointing Done on a Large Brick Building?
The mason removes failing mortar to a set depth, cleans the joints, replaces broken brick and packs new mortar in layers, then tools the joints. On a large facade, the work is divided into zones so scaffolding moves in order and entrances stay usable.
Mortar must suit the brick. Brick from the 1930s is softer than modern brick, and a hard modern mix can crack its edges. We match the mix to the wall and show you a sample patch before the work spreads.
Entrances, sills and parapets
Water attacks the most exposed spots first. Parapets, window sills and the courses just above the ground fail earlier than the middle of a wall. We start with those places when funds are limited.
Houses and chimneys
On the surrounding streets, a single owner can have pointing done on one wall, the stoop or the chimney. Smaller jobs go faster and often need no scaffold.
Mortar crumbling on your Parkchester building? Ask for an inspection and a written quote.
Request Your Quote Call NowCost Factors
What Affects the Price of Brick Pointing in Parkchester?
Price depends on the wall area, the depth of mortar removed, the height of the work and the mortar match. Scaffolding is often the largest single item on tall facades. The estimate lists each part so a board or owner can compare it.
Wall area
The more brick that needs pointing, the more labor the job takes.
Height and access
Mid rise walls need scaffolding or a swing stage, which affects the budget.
Depth of cut
Deeper joints take more time and more mortar.
Brick repair
Spalled or cracked brick must be replaced before pointing.
Boards and managers can ask for a section by section price so work can be phased over a budget cycle.
Get a Free EstimateDo Pointing Jobs in Parkchester Need a Permit?
A pointing job on your own wall skips the DOT sidewalk permit. A scaffold or shed on the public sidewalk, structural repairs and larger facade work can need city approval. Ask the city what your building must do before scaffolds go up.
We know of no historic district in Parkchester. The facade inspection program, Local Law 11, reaches buildings above six stories. Check with the city on whether any building you manage falls under it.
Owners of condominium units should speak to the board before asking for work on a shared wall.
Process
What Are the Stages of a Pointing Job in Parkchester?
Inspection
We study the wall, test the mortar and photograph the problem areas.
Estimate
Wall area, depth and materials appear in writing.
Setup
Scaffolds go up and permits are filed where required.
Pointing
Old mortar is cut out and new mortar is packed and tooled in zones.
Cleanup and review
We clear debris, brush the wall and walk the work with you.
Nearby
Brick Pointing Near Parkchester
East Bronx neighborhoods nearby where we also repoint brick.
FAQ
Parkchester Brick Pointing Questions
Yes. We can price a facade in sections and prioritize the worst walls first.
Not if the work is done with care. We choose mortar that will not stain or crack nearby terra cotta and keep tools off the figures.
It crumbles, leaves gaps or turns sandy. If you can push a key into the joint, it is soft.
Yes, and those jobs are usually quicker because scaffolding is rarely needed.
Call (718) 468-8803 and ask for an inspection.
Contact
Book Your Parkchester Pointing Inspection
Name the building type and the walls that look tired. Photos of the joints help.
- Call us(718) 468-8803
- HoursMon to Sat, 9:00 AM to 6:00 PM
- Free on site estimate with a written price
- Licensed and insured, 25+ years in business
- We handle DOT sidewalk permits
- Serving Manhattan, Brooklyn, Queens and the Bronx
Get Your Free Estimate
Takes about a minute. No cost and no obligation.